Sold!
Buy one like this

I want to sell a machine like this

  • Automatic
  • New Britain
  • Model 62
  • Multi Spindle Bar
  • 6 Spindle
  • 1971
New Britain Model 62 Multi Spindle Bar 6 Spindle 1971

Specifications

STANDARD SPECIFICATIONS
Height: 6'5"
Length:12'
Weight:19,000 lbs
Width:4'8"
Cap. Round: 1 5/8" or 2 1/4"
Coolant Capacity 130 Gallons
Idle 1.52 w/3" Tool Slide Cam
Idle 1.66 w/6" Tool Slide Cam
Max Die Head Dia: 5 1/4"
Max Feed Lower Slides 1.655"
Max Stock Feed 7 1/2"
Max Feed Mid Slides 1.504"
Max Feed Top Slides 1.504"
Max Trav Lower Slides 2 9/16"
Max Trav Mid Slides 2 5/16"
Max Trav Top Slides 2 5/16"
Motor Horsepower 15-30 at 1800 RPM
Spindle Speeds 177-2519
Standard Bearings: Ball
Tool Slide Travel 6"

Notes

Voltage - Dual
Set to 220/3/60
pdf file shows a print of the part running,
Stock Reel
Stock Stand
Universal Chip Conveyor
Hydraulic Threading
Aux. Pos. 4 and 5
Spindle Bearings Replaced 4,000 hours ago.
Cams and Gears As Mounted
Master Collets
Master Pushers
Pusher Tubes
Complete Covers and Guards
Drill Saddles
Hydraulic Feed Clutches
The main toolslide has a little less than .002 lift
using a 4x4 that is 53” long to apply pressure.
Spindle runout on an 1.25” diameter cold drawn
bar .75” from face of coolet pad is .002.The stem
is in perfect condition.This machine ran steel
bars about 80% of it’s life.We bought the machine
new in December 1971.
(2) 5 Degree Form Tools
1 used Winter 170 Thread Roll
1 Logan Threading Clutch and piping
(2) Shave Tools 62-6 - 5 degree
Main Tool Slide cam 1-1/4 or close
(2) 3/8" Cross slide cams
(2) 1/2" Cross slide cams
(2) 5/8" Cross slide cams
Requesting 3" Main tool slide