Ottomatics Inc. Machine List

Specifications

Wing Diameter:
-Over Front Apron: 23.0 "
-Over Cross Slide: 9.5 "
Capacities:
-Chuck Size: 8.3 "
-Max Cutting Diameter : 10.3 "
-Max Cutting Length: 20.0 "
-Max Cutting Length W/Std Workholding: 19.0 "
-Bar Capacity: 2.0 "
-Between Centers: 24.0 "
Travels & Feedrates:
-X Axis: 8.45 "
-Z Axis: 20.00 "
-Rapids on X: 1200 in/Min
-Rapids on Z: 1200 in/Min
-Max Thrust X: 2400 Lb
-Max Thrust Z: 3700 Lb
Big Bore (Opt) Cap. :
-Chuck Size (Max): 10.0 "
-Max Cutting Diameter: 10.3 "
-Max Cutting Length: 20.0 "
-Max Cutting Length W/Std Workholding: 17.5"
-Bar Capacity: 2.5 "
-Between Centers: 24.0 "
Spindle:
-Spindle Nose: a2-6
-Max Rating: 20 Horsepower
-Max Speed: 4000 Rpm
-Max Torque: 154 Ft-Lb @ 650 Rpm
-Spindle Bore O 3.00 "
-Draw Tube Bore O 2.06
-5,000 Rpm/30-Hp (Opt)
-Max Torque 120 Ft-Lb @1400 Rpm
-7,000 Rpm/20-Hp (Opt)
-Max Torque 80 Ft-Lb @1400 Rpm
Big Bore (Opt) Spindle
-Spindle Nose: a2-6
-Max Rating: 30 Horsepower
-Max Speed: 3400 Rpm
-Max Torque: 300 Ft-Lb @ 700 Rpm
-Spindle Bore: 3.00 "
-Draw Tube Bore: 2.56 "
Power (Options May Increase Requirement): 28 Kva
With Tailstock Option:
-Travel : 20 "
-Taper : Mt4
-Thrust (Max): 1500 Lb
-Thrust (Min): 300 Lb
Turret :
-Number of Tools : 10
-Od Vs Id Tools Any Combination
-Tool Size (Od Turning): 1.00 "
-Index Time (One Tool): 1 Sec
-Boring Bar Rear Clearance (from Turret Face): 4.37 "
Accuracy: S.a.E. Metric
-Positioning (+/-): 0.0002 "
-Repeatability: 0.0001 "
General:
-Air Required: 4 Scfm, 100 Psi
-Coolant Capacity: 40 Gal
-Power (Options May Increase Requirement): 195-260 Vac/50 a
-354-488 Vac/30 a 195-260 Vac/50 a
-354-488 Vac/30 a
-Machine Weight: 9000 Lb