Sold!
Buy one like this

I want to sell a machine like this

  • CNC Swiss
  • Tsugami
  • Panther SX 26
  • Lathe - CNC
  • 26mm
  • 1998
  • Live Tooling:
Tsugami Panther SX 26 Lathe - CNC 26mm 1998
Click here for photo gallery.

Specifications

Number of Tool Stations
7 OD Tools
4 ID Tools (2 Live, 2 Fixed)
3 ID/OD Backworking Tools
3 Cross Driven Tools
Tooling Sizes
Turning 5/8" Square
ID 1" Round ESX-16
Backworking 5/8" Round ESX-16
Driven Tools (2) ESX-16, (1) ESX-20 Collet
Programmable Servo Axis Designations
"Z2" ID Tool Slide In and Out 7.88"
Sub-Spindle Specifications
Maximum Diameter 1.02"
Maximum Drill Capacity, Mild Steel 5/16"
Maximum Tap Capacity, Mild Steel 1/4"
Speed Range (Serial Interface) 200 - 4,000 RPM
Power Rating 1.5 Horsepower AC
Sub Spindle Indexing 15 Degree Increment
Part Ejection Front or Rear by Arrangement
Maximum Bar Diameter 1.02"
Z1-Axis Travel 8.21"
Speed Range of Main Spindle 200 - 6300 RPM
Horsepower of Main Spindle 7.5 Horsepower
Driven Tool Drive Motor Rating 5/8 Horsepower
Maximum Speed Cross Tool T10 4,000 RPM (High Speed)
Maximum Speed Cross Tool T11 2,400 RPM (High Torque)
Maximum Speed Cross Tool T12 2,826 RPM (High Torque)
Offset from Guide Bushing T10 & T11 0.472" (.397 Max Shank)
Offset from Guide Bushing T12 0.965" (.511 Max Shank)
Spindle Center Height 39.37"
Spindle Index Increment 5 Degrees
Spindle Center Height 39.37"
Spindle Index Increment 5 Degrees
Dimensions 72" W x 46" W x 67" H
Approximate Weight 5,500 lbs
Bar Feed Weight (Approximate) 2,000 lbs
Bar Feed Length 15'6"
Electrics 208 Volt, 3 PH, 60 CYC, 7.5 Horsepower

Notes

Tsugami Fanuc LA1 CNC Control.
LNS Mini Sprint S2 Magazine Type Bar Feed
(1/8"-1" Capacity x 12' Length). Sub Spindle
Unit with 15^0 Indexing. Three Position
Backwork Station. Main Spindle Index
Unit And Brake.. Driven Stations For
(3) Cross Tools. Door Interlocks.
Enclosure For Control System. Pneumatic System
For Spindle Collet Actuation. Simple
Bar Feed Interface. Automatic Flood
Coolant System. All Motors And Controls
For 200 Volts. Automatic Lubrication System.
Total Enclosed Work Areas. Threading Under
CNC. Mayfran Chip Conveyor. Manuals.