Sold!
Buy one like this

I want to sell a machine like this

  • CNC Machine
  • Mori-Seiki
  • ZL25MC/1000 4-AXIS
  • Lathe - CNC
  • 3.15"
  • 1996
  • C Axis:
  • Y Axis:
 Mori-Seiki ZL25MC/1000 4-AXIS Lathe - CNC 3.15

Specifications

Swing Over Bed: 20.47"
Swing Over Cross Slide: 13.78"
Center Distance: 45.08"
Maximum Turning Diameter: 13.39"
Maximum Turning Length: 40.55"
X-Axis Travel, Turret #1: 11.3"
Z-Axis Travel, Turret #1: 42.9"
X-Axis Travel, Turret #2: 5.7"
Z-Axis Travel, Turret #2: 42.9"
Spindle Speeds: 35 to 3500 RPM
Spindle Nose: JIS A2-6
Hole Through Spindle: 3.15"
Spindle Bearing I.D.: 5.12"
Upper Turret Tools: 12 (6 Live Tool Positions)
Lower Turret Tools: 8 (No Live Stations)
Shank Height for Square Tools: 1"
Shank Diameter for Boring Bar: 2"
Turret Index Time: .7 Seconds Per Station
Live Tool Speeds: 80 to 2000 RPM
Rapid Feed Rate, X-Axis: 472.4 IPM
Rapid Feed Rate, Z-Axis: 590.6 IPM
Cutting Feed Rate Per Revolution, X-Axis: .0001" to 9.9"
Cutting Feed Rate Per Revolution, Z-Axis: .0001" to 9.9"
Jog Feed Rate, X & Z Axis: 0 to 50 IPM
Tailstock Travel: 42.9"
Tailstock Quill Diameter: 4.3"
Tailstock Quill Taper: #5 Morse
Tailstock Quill Stroke: 3.9"

Notes

EQUIPPED WITH:
MSC-516 Control
Upper Turret Live Tooling with Full C-Axis Spindle
LNS Hydrobar Spring S2 Bar Feeder
Serial # 16177-96, Model # S2, New 1996
Bar Diameter: 1/2" to 3-1/8"
Bar Length: 144"
Air Pressure Required: 75 to 90 PSI
Equipped with Rear Mounted Bar Loader, Large Assortment of Bushings
and Manuals
Cool Jet Systems High Pressure Coolant System
Serial # 3193, Model # 70-30SF
Rated Capacity: 8 GPM at 1000 PSI
6 HP Motor, Wired for 3 Phase, 208-230 Volts
Required Inlet Pressure: 20 to 60 PSI
Noise: 74 Decibels
Parts Catcher
Exit Conveyor for Parts Catcher, Approx. 96" Long
Full Length Chip Conveyor with Right Side Exit
Tool Presetter for Front and Rear Turret
Collet Chuck
(3) Live Tool Holders
All Available Manuals for Lathe, Bar Feeder and Coolant System
18.5 KW Motor, 30 Minute Rating

SHIPPING DIMENSIONS:
Machine: 203" L-R x 84" F-B x 84" H x 19,100 Lb.
Bar Feed: 177" L-R x 31" F-B x 52" H
Exit Conveyor: 101" L-R x 12" F-B x 30" H
Chip Conveyor: 106" L-R x 41" F-B x 55" H
Coolant System: 36" L-R x 17" F-B x 61" H
Bar Tube Rack: 78" L-R x 30" F-B x 56" H
Bar Feed Loader: 100" L-R x 48" F-B x 48" H
(2) Skids: 36" F-B x 24" L-R x 16" H Each