Sold!
Buy one like this

I want to sell a machine like this

  • Automatic
  • New Britain
  • Model 62
  • Multi Spindle Bar
  • 6 Spindle
  • 1978
New Britain Model 62 Multi Spindle Bar 6 Spindle 1978
Click here for photo gallery.

Specifications

STANDARD SPECIFICATIONS
Height: 6'5"
Length:12'
Weight:19,000 lbs
Width:4'8"
Cap. Round: 1 5/8" or 2 1/4"
Coolant Capacity 130 Gallons
Idle 1.52 w/3" Tool Slide Cam
Idle 1.66 w/6" Tool Slide Cam
Max Die Head Dia: 5 1/4"
Max Feed Lower Slides 1.655"
Max Stock Feed 7 1/2"
Max Feed Mid Slides 1.504"
Max Feed Top Slides 1.504"
Max Trav Lower Slides 2 9/16"
Max Trav Mid Slides 2 5/16"
Max Trav Top Slides 2 5/16"
Motor Horsepower 15-30 at 1800 RPM
Spindle Speeds 177-2519
Standard Bearings: Ball
Tool Slide Travel 6"

Notes

Machine is located in Michigan
Hydraulic Feed Clutches
6 Independent Cross Slides
Cams and Gears
Collets & Pushers - Masters
Covers and Guards
Motors and Controls
Speed and Feed Gears
Stationary Tool Slide Holders
Stock Reel And Stand

NB62
2 1/4" capacity
3" tool slide cam drum
ser. # 39430
Repair Log
PART Repair Discription Date
INDEX readjusted index plate (geneva) 2/25/97
hard stops replaced six hard stops 3/6/97
stop lever stud replaced stock stop lever ecc. stud(used) 3/14/97
chucking fork replaced 5/15/97
brake cone replaced cone (broken) 6/5/97
hi speed fork shoes replaced shoes (broken) 6/5/97
ROLLER CLUTCH replaced clutch cup and rolls (distroyed) 6/13/97
roller clutch repaired roller clutch disc (apollo) 6/13/97
clutch fingers hi sp clutch fingers and springs (broken) 6/20/97
clutch spacer hi sp clutch anti stick spacer made/installed 6/20/97
stock reel realined stock reel wheels 8/29/97
index pin replace index plate pin & idler gear bushing 10/13/97
chuck guard installed guard to keep chucks closed 10/13/97
conveyor drive replaced conveyor drive with acme unit 10/30/97
drive chain replaced worn drive chain (during maint) 11/6/97
loc&lock spring replace broken locking and locating spring 11/18/99
hi sp. clutch new plates and filed cup&keys 12/14/99
cam roll carreir lift cam roll bearing 11/2/00
returned from storage 12/23/05
loc&loc conecting rod replaced 1/5/06
loc& loc springs replaced connecting rod spring and loc &loc arm springs 1/5/06
bearing(stub shaft) replace worn outter stub shaft bearing 10/3/06
Spindle Bearing End Play
Date spindle #1 spindle #2 spindle #3 spindle #4 spindle #5 spindle #6
11/21/06 0.002 0.001 0.002 0.002 0.002 0.001
6/20/07 0.001 0.001 0.002 0.002 0.002 0.001
9/18/07 0.001 0.0015 0.0015 0.001 0.001 0.0015

9/22/09 Carrier lift 0.010
9/22/09 tool slide to stem play none