Sold!
Buy one like this

I want to sell a machine like this

  • CNC Machine
  • Eurotech
  • 420SSL-7
  • Lathe - CNC
  • 1997
  • C Axis:
  • Y Axis:
  • Number of Axis: Yes
  • Live Tooling:
 Eurotech 420SSL-7 Lathe - CNC  1997

Specifications

Eurotech Elite Quattroflex 420-SLL 7-Axis CNC Turning Center
* Live Tooling * Sub-Spindle * Barfeed *
New 1997
General specifications as per brochure
CNC Control: Fanuc 18T
Main spindle:
bar capacity: 41 mm
max. machining diameter: 160 mm
max. machining length: 300 mm
max. swing: 200 mm
distance between noses: 560 mm
variable speed range: 100 - 5,000 rpm
spindle nose: asa 5"
spindle bore: 52 mm
inside dia of front bearing: 80 mm
chuck diameter: 165 mm
collet assy: din 6343
motor power: 11 - 15kw (50%)
# of tools: 12
type: bi-directional
tool shank for outer turning: 20 x 20 mm
tool shank for inner turning: 25 mm
turret indexing (1 pos) (sec): 0.4
# of live tools: 6
variable speed range: 100 - 3,000 rpm
motor power (kw): 1.5 - 3.7 kw
x-axis stroke: 175 mm
z-axis stroke: 305 mm
raid traverse rate (x/z-axis): 12/20
Sub-spindle:
bar capacity: 25 mm
max. machining diameter: 100 mm
max. machining length: 150 mm
max. swing: 150 mm
distance between noses: 560 mm
variable speed range: 100 - 5,000 RPM
spindle nose: ASA 4"
spindle bore: 42 mm
inside dia of front bearing: 65 mm
chuck diameter: 130 mm
collet assy: din 6343
motor power: 3.7-5.5kw (50%)
# of tools: 12
type: bi-directional
tool shank for outer turning: 20 x 20 mm
tool shank for inner turning: 25 mm
turret indexing (1 pos) (sec): 0.4
# of live tools: 6
variable speed range: 100 - 3,000 rpm
motor power (kw): 1.5 - 3.7 kw
X-axis stroke: 132 mm
Y-axis stroke: 155 mm
Z-axis stroke: 340 mm
rapid traverse rate (x/y/z-axis): 12/20/20
Controlled c-axis:
type: cs (direct)
min. programmable value: 0.001 deg
max. rapid traverse (rpm): 80
Cooling system:
tank capacity (l): 150
pump nominal displacement (l/min): 50
electropump rating (kw): 0.75
Dimensions (approx.): 143.81" x 76.44" x 72.11"
Weight (approx.): 10,780 lbs
Equipped with (must be verified by buyer):
Iemca Boss 42 Magazine type Bar feed, S/N 97090820
Parts catcher
Coolant system
Chip conveyor
Splash guards
Turret tooling
(2) collet chucks
Main & sub spindles
C-Axis on main & sub spindles
Upper & lower turrets w/live tooling
Misc. live tools
Misc. o.d. & i.d. tools

Notes