I want to sell a machine like this
- Automatic
- Index
- Multi Spindle Bar
- 32mm
- 2007
- Spindle Size: 32mm
- C Axis:
Specifications
*** ONLY 4000 RUN HOURS ***Technical data from Brochure
CNC Control: INDEX C200-4D (Double NCU)
Work spindles: 6
Bar capacity max. 32 mm
1.259 in
Power at 100% 6 / 4 kW
6 / 5.5 Horsepower
Speed max. 6300 RPM
C-Axis
No of Tool slides 12
Travel X / Z / Y 68 / 100 / 32 mm
2.677 / 3.937 / 1.26 in
Rapid traverse 12 m/min
39 ft/min
Backworking tools 1
Power supply 400V / 60Hz
Total connected power 75kW / 89 kVA
Overall Dimensions 20'9"L x 5'10"W x 7'10"H
6338 x 1800 x 2400H mm
Equipped with (must be verif ied by buyer):
IEMCA SIR MS32/38/P Bar Loading Magazine unit, 12' bar length capacity
26mm (for 21mm max dia) guide channels
Transformer; 90KVA (V250)
Workpiece removal unit, hydraulic-type, fitted for spindle position 6
with Conveyor, #SPL6 fitted on outside of machine
Synchronous unit incl. Roehm 3-jaw chuck, spindle position 6
Tool mounting for two tools used for rear end machining in position 6
Boring unit for 3-jaw chucks & additional drive units
Electrically set up for auxiliary drive including electr onic shaft &
absolute transmitter, spindle position 4, 5 & 6
Additional drives 611D, spindle positions 1, 2, 3, 4, 5, & 6
Electrical feed monitoring system for bar end stop
Cooling unit (400V/60 Hz), 26kW
Cooling supply & chip removal system hinge-type conveyor, discharge to
front
Hi-Pressure pump 55 liters/35 bar
Oil mist separator, 2-stage
Machine prepared for connection to central extraction / filter system
Fire protection hatch for central oil mist extraction system
Indicator lite, Blue; end of bar & fa ult
ELECTRIC SYSTEM AND CONTROL OPTIONS
Freely programmable interface 16 I / 16 O
NC option Synchronous spindle / polygon turning
Cable installation for the integrated process monitoring system Artis for
operating panel, 8 channels
Prepared for analog teleservice
Remote link software package
Notes
SLIDE UNITS, NO.1 HEADSTOCK
Slide unit 1.1, X & Z axes NC-controlled
No.1.2, slide unit, X, Z axes NC-controlled
No.2.1, slide unit, X, Z axes NC-controlled
Slide unit 2.2, X, Z axes NC-controlled
Slide unit 3.1, X, Z axes NC-controlled
Slide unit 3.2, X, Z axes NC-controlled
Slide unit 4.1, X, Z axes NC-controlled
Slide unit 4.2, X, Z axes NC-controlled
Slide unit 5.1, X, Z axes NC-controlled
Stroke increaser in Z position 5.1
Slide unit 5.2, X, Z axes NC-controlled
Slide unit 6.1, X, Z axes NC-controlled
Slide unit 6.2, X, Z axis NC-controlled
Drive units for Powered Tools (excl converters)
CLAMPING DEVICES FOR MAIN SPINDLE
Collet Chuck ZW for Draw-type Clamping, max. clamping dia 32mm
Mechanical head changer for 32m m dia draw-type clamping head