Sold!
Buy one like this

I want to sell a machine like this

  • Automatic
  • New Britain
  • Model 61
  • Multi Spindle Bar
  • 1-5/8"
  • 1943
  • Spindle Size: 1 5/8"

Specifications

Universal Threading Pos.6
Offset Drive
Chip Conveyor - Drag Type
Cams and Gears
Collets & Pushers - Masters
Covers and Guards
Cross Slide Tool Holders
Motors and Controls
Pusher Tubes
Collet Tubes
Speed and Feed Gears
Stationary Tool Slide HoldersStock Reel And Stand
5 Cross Slides
STANDARD SPECIFICATIONS
Hight: 6'
Length: 12'
Weight: 16,400 lbs
Width: 4'
24115 is Old Style
Max RPM with 73 Tooth Main
Max. Hex Capacity: 1 15/16"
Max. Round Capacity: 2 1/4"
Max. Stock Feed 7 1/2"Max.Feed Mid Slide 2 5/16"
Max .Square Capacity: 1 9/16"
Max.Travel Low Slide 2 9/16"
Spindle Speeds 118-2527 RPM
Standard Horsepower 30
Tool Slide Travel: 6 or 3"

Notes

Very good machine under power running parts. The spindle bearings are tight, main tool slides are tight, cross slides, tight, repeat fine, hold a good tolerance plu or minus .001 length and plus or minus .002 on the cross slides without shaving.. The cross slide holders are primarily dovetails and the collets and pushers are Hardinge masters.|One of these machines has a 3" Main tool slide cam for a lower cycle time, the other has a 6".| Spacers on the back end for collet clamping should be replaced.|