Send Me A Quote

I want to sell a machine like this

  • Automatic
  • Acme Gridley
  • Multi Spindle Bar
  • 9/16"
  • 1944
  • Spindle Size: 9/16"

Specifications

Universal Threading Pos.4
Accelerated Reaming Pos. 5
Cams and Gears
Chip Conveyor
Collet & Pusher Tubes
Cross Slide Tool Holders
Main Toolslide Drill Saddles
Motors & Electrical Controls
One Set of Cams and Gears
Outboard Coolant Pump
Splash GuardsStock Reel And Stand
Hight To Top Of Motor: 5' 6 "
Length: 7' 8 1/2"
Weight:10,900 lbs
Width: 3' 7"
***GENERAL SPECIFICATIONS***
Collet Capacity Round: 9/16"
Collet Capacity Square:25/64"
Collet Capacity Hex:1/2"
Idle Time: 1.2
Stock Feed Travel: 5"Main Tool Slid e Travel:3.375"
Spindle RPM if Stopper 2370
Spindle Speeds: 321-3200
Standard Main Motor: 15 Horsepower

Notes

Price is for the two machines and the tooling. Both machines are in the 40's and in fair to good condition with tooling included. Photographs available via e-mail or regular mail.||The carrier area of these machines look good and the tool slide lift is about .001, carrier drop about .005 and .006 at 1 o'clock, the gear boxes and back end need to be reconditioned and the machines could use a coat of paint.|Serial's are: |22732-B - .0065/.007 carrier drop|22034-A - 005/.006 carrier drop||Typical tooling - dove tail 1st, hardinge 3/8 hex collets, Erickson holders, knee turner 3rd, dove tail 3rd & 4th, cutoff 5th.||Price for each machine completely rebuilt $59,500. A detailed description of the rebuilding procedure will be furnished upon request. - Rebuilding will take approximately 8 weeks.|