Send Me A Quote

I want to sell a machine like this

  • CNC Multi Spindle
  • Tornos
  • Multi Alpha 8 X 20
  • Multi Spindle Bar
  • 2007
  • Spindle Size: 20mm
  • C Axis:

Specifications

TORNOS MULTI ALPHA 8X20 CNC Multi Spindle Lathe 2007 Model Swiss Made-Used-2.EL Machine Bench Technical Specifications / TECHNICAL DETAILS Bar Capacity / Bar capacity: 22 [mm] Max. Part length / Max. component length: 100 [mm] Bench Speed ​​/ Spindle speed: 8000 [rpm] Max. Spindle torque / Max spindle torque: 17 [Nm] Counter Spindle Speed ​​/ 8000 [rpm] Max. Max counter-spindle torque: 8.3 [Nm] 1 cross slide unit position 1: x = 50 [mm], Z1 = 80 [mm] 1 cross slide unit position 2: x = 50 [mm], Z1 = 80 [mm] 1 cross slide unit position 3: x = 50 [mm], Z1 = 80 [mm] 1 cross slide unit position 4: x = 50 [mm], Z1 = 80 [mm] 1 cross slide unit position 5: x = 50 [mm], Z1 = 80 [mm] 1 cross slide unit position 6: x = 50 [mm], Z1 = 80 [mm] 1 cutting slide unit position 7: x = 65 [mm] 1 cutting slide unit position 8: x = 65 [mm] Counterclockwise Moving along the spindle / Travel along sub-spindle Y / Z axis: 280/450 [mm] Installed Power: 75 [KVA] Bench Dimensions / Dimensions (lx H x W): 10.1 x 1.8 x 2.6 [m] Weight / Weight: 12 [t] Machine Tools - Accessories / EQUIPMENT Twin Back Operations / Twin back operations 2 x 5 sets rear opers / 2 x 5 tools for back-operation 2 Numerical manipulator / 2 nummeric manipulators 8-track spindles with independent speeds / 8 motorized spindles with independent speeds Standing and positioning / Stopping on each spindle Positioning on each spindle Spindle Cooling / Spindle cooling Bar Feeder: TORNOS MSF-522/8 High Pressure Refrigerating Unit / Coolant unit with HP pump Filter Unit / Filter conveyor Fire extinguisher Miscellaneous Tool Holders / Various tool holders NC FANUC 30i model A TB-DECO ADV software 2 crossing slides with Y ax

Notes

Repair parts listed in pdf can be purchased for $50,000
4 Meter Robobar MSF-522 Bar Feed. 2 Counter Spindles. 2 High Pressure Pumps: 100 Bar. Ran oil. 23,000 running time. Special manipulator for Pick and Place.
Max Spindle Speed: 6000 RPM
6 Cross Slides with X- and Z-axis
2 Cross Slides with X-axis only (cutoffs)
2 Backwork Slides with X-axis only (holds 5 tools)
2 Pickoff Spindles Z- and Y-axis
6 Front Spindles (Pos. 3,4,5,6 are live spindles)
Coolant tank with 3 high pressure pumps
3 low press pumps and two high pressure pumps / 3 bag filters, 1 magnetic filter
Manipulator with 2 sets of grippers
Numerous spare parts included