Sold!
Buy one like this

I want to sell a machine like this

  • CNC Swiss
  • Tsugami
  • BU 26SY
  • Lathe - CNC
  • 32mm
  • 2003
  • C Axis:
  • Y Axis:
  • Live Tooling:
Tsugami BU 26SY Lathe - CNC 32mm 2003

Specifications

Main Spindle
Bar Capacity: 1.000"
Turning Lengths: 9.842 " per Stroke
Indexing Inccrements: Full C-Axis (.001 deg)
Speeds: 6000 RPM
Sub-Spindle
Bar Capacity: 1.000 "
Speed: 200 - 5000
Drive Motor: 7.3 hp
Index Increment (Degrees): Full C-Axis (.001 Deg)
Axis Specifications
STD. Number of Axes: 8
Axis/ Travel/ Traverse rate/ Feed rate
X1 (STD.) 1.378 Inch 472 IPM 236 IPM
Z1 (STD.) 9.842 Inch 944 IPM 236 IPM
C1 (STD.) 360.000 Deg.
Y1 (STD.) 9.448 472 IPM 236 IPM
X2 (STD.) 4.330 Inch 472 IPM 236 IPM
Z2 (STD.) 5.511 Inch 944 IPM 236 IPM
Y2 (STD.) 3.149 Inch 393 IPM 236 IPM
Z3 (OPT.) 11.220 Inch 944 IPM 236 IPM
Live Tool Speed: 5000 RPM
Live Tool Motor: (HP): 15.0
Type/ Gang-Slide/ Turret
-Max. number of tools
Turning 7 8
Rotary 2 4
Square 0.500 "
Round 0.750 " 1.000 "
Rotary 0.250 " 0.500 "
Rotary tooling
Horse power .7 1.9
Speed 8000rpm 5400rpm
There are a number of tools offered that allow for 2 - 4 tools on one holder
On-Center Mill Drill Standard with 'C' Axis
Off-Center Mill Drill Standard with 'Y' Axis
Machine Net Weight: 13200 lbs
Floor layout: Length: 137 " x Width: 80 " x Height: 69

Notes

Equipped with:
Tsugami/Fanuc LH1 Control
LNS Super Hydrobar Barfeed
High Pressure Coolant
Parts Catcher and Conveyor
Coolant Pump and Pan
Mist Buster
Instruction Manual
Tooling as shown
Used machine offered as is as removed from service from medical parts manufacturing plant. Machine was used to make surgical screws. Working when removed from service