I want to sell a machine like this
- CNC Multi Spindle
- Index
- 1-1/4 MS-32c
- Multi Spindle Bar
- CNC
- 2002
- Spindle Size: 32mm
Specifications
Workspindles 6Bar Capacity Max.Mm 32
Power at 100% Kw4
Torque at 100% Nm15
Speed Max.Rpm 6300
C-Axis
Tool Carriers
Number of Tool Carriers 12
Travel X / Z / Ymm68 / 100 / 32
Synchronous Spindle
Chuck Size Max.Mm 95
Power at 25% Kw 10
Torque at 25% Nm 16
Speed Max.Rpm 6300
Backworking Tools 2
Dimensions L X W X H Mm 6338 X 1800 X 2400
The Ms32C Is the Compact Version of the Ms32 Series.
The 12 Tool Carriers Can Be Equipped With Two Tools Each.
Independent of the Position, Any One of These Tool Carriers
Can Be Equipped With I.D. or O.D. Tools. Contrary to Conventionally
Designed Machines, Which Consist of 6 Cross Slides and 6 End
Working Tools, the Tools Can Always Be Chosen Optimally Based
on the Need of the Particular Job.
Six Separately Driven Motor Spindles With C-Axis Capabilities
Speed Control for Optimal Cutting Speeds, Favorable Chip
Breaking, and Short Cycle Times Twelve Independently Working
Cnc-Controlled Tool Slides, Optionally With One or Two Axis
Particularly Suitable for Part Families Due to Flexible Setup and
Fast Changeover Complete Machining With Driven Tools in All
Spindle Positions Automatic Loading and Unloading of Chuck Parts
High Dampening Effect of Hydrostatically Guided Z-Axis
Notes
The machine is in perfect condition and can any time rootstyle and be paraded.
Since the overhaul by index in the factory of Deizisau in 2013 our customer has operated only occasionally the machine. The machine parts produced since then up to 3,500 hours.
9tweuorrt
Please find enclosed the equipment:
MS 32 G model year 2002, but overhauled by INDEX in Germany 2013 as follows: software update on level 5, new Artis map for 8 channels, exchange of all hardware components as screen, cable, keys, MMC 103, all valves, pressure accumulator, new heat exchanger. Replace hydraulic and hydrostatic pump
CNC 840D with elect. Shaft, transmit and dual TRANS with function
6 main spindles with hollow clamping cylinder C axes, pliers recordings SW Hainbuch
Counter spindle drum: 6 counter spindles with internal coolant supply and Röhm three-jaw Chuck, C-axis
Sled: 1.1/2.2/3.2/4.2/5.1/6.1/6.2 3.1/4.1/5.2, all X and Z all three X / Y / Z, as well as counter spindle page: 1.3/2.3/3.3/4.3/4.4/5.3/5.4 all X / Z
IEMCA MS 32/33/P overtaken 2016 surface loader
Knoll chip conveyor with vacuum filter system and pumps: 3 bar / 300 litres + 40 bar / 18 liters, 20 bar (for counter spindle coolant) with cooling unit
Several electrical preparations for drive motors 3 X in the positions 1,2,3, as well as 2 X in the 4,5,6
Oil-air lubrication for 6 driven tool holder
Mehrkantdreheinrichtung
Preparation of central extraction as well as for external cooling