I want to sell a machine like this
- CNC Machine
- Nakamura
- WY-100
- Lathe - CNC
- 2015
- Spindle Size: 2"
- C Axis:
- Y Axis:
- Number of Axis: Yes
- Dual Spindles:
- Live Tooling:
Specifications
Chuck Size 6"Max Diameter Bar Capacity (Left / Right) 2" / 1.65"
Max Turning Diameter 6.89"
Distance Between Spindles 32.28"
Max Machining Length 23.15"
Spindle Speed 1 - 5000 RPM
Spindle Bore (Left / Right) 2.48" / 2.2"
Spindle Nose (Left & Right) A2-5
Spindle Motor (Left & Right) 15 HP
Tools (Upper / Lower Turret) 12 / 12 (All Live)
Milling Motor 7.5 HP
Milling Speed 6000 RPM
Sub Spindle Motor 15 HP
Sub Spindle Speed 6000 RPM
Sub Spindle Travel 24.44"
Rapid Traverse Rates (X / Z) 630 / 1575 IPM
X-Axis Travel (X1 & X2) 5.31"
Z-Axis Travel (Z1 / Z2 / Z3) 9.6" / 9.6" / 22.75"
C-Axis Index (Left & Right) .001 Degrees
Y-Axis Travel 2.44"
Machine Dimensions (L x W x H) 110" x 77.5" x 77"
Machine Weight 16,317 lbs.
Notes
FANUC 31iA CNC CONTROL
19" Color LCD
Upper & Lower Turrets with Opposed Spindles
Y-Axis Milling on Both Turrets
C-Axis Milling Capability on Both Spindles
NT Nurse II System
6" Kitagawa 3-Jaw Hydraulic Chuck for Sub Spindle
ATS S-20 Dead Length Collet Chuck for Main Spindle
ATS 16c Dead Length Collet Chuck for Sub Spindle
LNS Quick Load Servo 80 S2 Short Magazine Barfeed
(2) USB Ports
Auto Parts Catcher
Chip Conveyor (Side Exit)
Automatic Tool Presetter
Through Spindle Coolant (Two Pump System)
CAMplete Software
Coolant/Air Flush
Helical Interpolation
(2) OD Live Holders (ER25)
(2) Face Live Holders (ER25)
(7) ID Boring Holders (1")
(6) Turning Holders (3/4")
(4) Double Ended Boring Holders (1" ID)
(2) Cut-Off Holders (3/4")
(2) Face Turning Holders (3/4")
Quadruple Turning Holder (5/8")
Double Turning Holder (3/4")
Mfg Date November 2014
Installed in March 2015
15,464 Power On Time
7,186 Run Time