I want to sell a machine like this
- CNC Machine
- Nakamura
- Super NTMX
- Lathe - CNC
- 2012
- Spindle Size: 2"
- B Axis:
- C Axis:
- Y Axis:
- Dual Spindles:
Specifications
Max. Swing Over Cross slide 8.07"Max. Turning Diameter 7.87"
Standard Turning Diameter 6.69"
Standard Turning Diameter 30.7"
Main Max. Bar Capacity 2.04"(Both Spindles)
Spindle Nose/ Spindle Thru Hole Dia. A2-5"/2.48"
Spindle Speed 45-5000 RPM
Main Spindle Motor 15 HP AC
Right Spindle, Spindle Nose/Thru Hole Dia. A2-5"/2.48"
Spindle Speed 45-5000 RPM
Draw Tube 2.047"
Right Spindle Horsepower 15 HP AC
Slide Travel X1/X2 22.44"/5.14"
Slide Travel Z1/Z2 51.06"/25.9"
Slide Travel Y Axis Upper Slide 3.937"
Slide Travel B2 Axis 30.3"
Rapid Feed X1/X2 1182/630 IPM
Rapid Feed Z1/Z2 1576/1576 IPM
Rapid Feed B2 1576 IPM
Rapid Feed Y 630 IPM
C-Axis 0.001
Rapid Index Feed 600 IPM
Spindle Speed 45-12000 RPM
Tool Shank Capto C4
Number Of Tool Stock 24 X 2
Tool Spindle B-Axis 190 Degree ( -95 Degrees)
Type Of Turret Head Dodecagonal Drum Turret
Number Of Tool Stations 24
Machine Weight 30,000 Lbs.
Notes
One (1) Nakamura Super NTMX with B-Axis I Parts Catcher A
Upper Hours: 8319 H 51 M 11 S
Lower Hours: 8025 H 53 M 11 S
Fanuc 31i-A5 Control
(2) 15/10 HP Spindle Motors
5,000 RPM Left and Right Spindles
2.0" Bar Capacity, Left and Right Spindle
(2) 24-Station ATC Units for B-Axis
B-Axis Capto C4 Tool Spindle
10/5 HP B-Axis Spindle Motor
12,000 RPM B-Axis Spindle
Full C-Axis on Both Spindles
(1) Lowers Turret No Milling (12) Position
8.07" Maximum Swing Over Slide Covers
7.67" STD Turning Diameter
Y Axis Stroke Upper Side +/- 3.93"
NT Nurse II System
NT Navigator
Parts Catcher A
Chip Conveyor
OMP60M/LP2 Retrofit Kit (Tool Setting)
OMP60M LP2 Adaptor
LPE2 1OOMM Extension
Toolsetting Styli (TBA)
Capto C4 Shank
Toolsetting Software Fanuc
Application Development on Site 1 Week
NC4 Laser Probe to Set Tools on B-Axis
In Process Measurement
Tool Center Point Control
Tilted Work Pane
AICCll
Jerk Control
Data Server
Upgraded Coolant Pump Lower Turret