I want to sell a machine like this
- CNC Machine
- Nakamura
- WT-100 MMY
- Lathe - CNC
- 2011
- Spindle Size: 1 5/8"
- C Axis:
- Y Axis:
- Number of Axis: Yes
- Dual Spindles:
- Live Tooling:
Specifications
Nakamura WT-100 MMSpecifications (Subject to buyer verification):
Control Fanuc 31i Model A
Max Turning Diameter 7.48"
Max Turning Length 15.7"
Slide Travel: X1/X2 6.2"/6.5"
Slide Travel: Z1/Z2 18.3"
Slide Travel: Y +/- 1.3"
Slide Travel: B-Axis 21.65"
Spindle Speed 6,000 RPM
Hole Through Draw Tube 2"
Full C-Axis
Number of Driver Tool Stations 2 x 12
Drive Motor Left Spindle 20/14 HP
Drive Motor Right Spindle 14/10 HP
Machine Weight 13,000 LBS.
Machine Dimensions 142" x 78" x 73"
The WT-100 is a compact multi-tasking platform,
handling up to 42mm bar. High speed and high horsepower
help this machine reduce cycle times.
Opposed two-spindle, 2-turret construction
12 Station Turret with Half-Index Capability (48 total)
24 Milling tool stations
62mm Y-axis on Upper Turrets (+/ 31mm)
6000rpm Milling speed (Upper / Lower)
15 HP + 15 HP L/R spindle motor
9.7 HP C-Axis Milling Capable
Notes
The machine will come with a 6ft Iemca bar feeder(it has bar end retract on it). It also has 1000PSI high pressure coolant which is split to both turrets(500PSI a piece) and sub spindle coolant flush. We’ve done regular yearly PM’s on the machine. I’m probably missing something…I’ll get you pictures within the next few days. It’s running a job currently so I don’t want to interrupt that.
Tool List:
11 ¾” shank turn holders
8 radial live tool holders
5 ½ index double ID tool holders
3 ½ index quad ¾” turn tool holders
1 axial live tool holders
1 double axial live tool holder
2 double radial live tool holders
1 triple radial live tool holder
2 angle live tool holders(1 needs to be rebuilt)
Main collets: 1.25”, 1.0”, 1.5”, 1 5/8”
36 sub collets
2 brand new touch probes for indicating in tooling.
Power on time: 23398
Run Time: 12219
Main collets: 1.25”, 1.0”, 1.5”, 1 5/8”