Ottomatics Inc. Machine List

Specifications

Working Area
Swing over Bed: 23.6”
Swing over Cross Slide: 19.7”
Distance Between Spindle Noses: 38.4”
Maximum Turning Diameter: 16.6”
Maximum Part Length: 29.3”
Maximum Bar Stock Diameter: 2.5”
Travel
Travel in X/X2: 11/8.1”
Travel in Z/Z2/Z3: 35.4/29.5/29.5”
Travel in Y: 3.9” ( /-2”)
Main Spindle
Speed Range (Infinitely Variable): 0-5,000 Rpm
Maximum Torque: 184.3 Ft/Lbs
Spindle Nose: a2-6
Spindle Diameter at Front Bearing: 4.1”
Spindle Bore (Excluding Draw Pipe): 2.9”
Maximum Bar Capacity: 2.5”
Counter Spindle
Speed Range (Infinitely Variable): 0-7,000 Rpm
Maximum Torque: 953.8 Ft/Lbs
Spindle Nose: a2-5
C-Axis
Resolution: 0.001 Degree
Rapid Traverse: 1,000 Rpm
Drive Power
Main Spindle (Ac Hollow-Spindle Motor): 38.9 Hp
Counter Spindle (Ac Hollow-Spindle Motor): 29.5 Hp
Tool Turret Top and Bottom
Number of Tool Stations: 2X12
Vdi Shaft: 1.2”
Tool Cross-Section for Square Tools: .8” X .8”
Shank Diameter for Boring Bars: 1.3”
Turret Indexing Time: 0.2 Sec
Driven Tools
Speed Range: 0-5,000 Rpm
Maximum Torque: 18.4 Ft/Lbs
Drive Power: 9 Hp
Number of Driven Tools: 2X12
Feed Drives (Counter Spindle)
Rapid Motion Speed in X/Z/Y/Z3: 945/1181/394/1181 Ipm
Feed Force in X/Z/Z3: 1121/1798/2023 Lbs
Coolant System
Tank Capacity: 79 Gallons
Pump Power: 2.7 X 3 Hp
Power Consumption
Connected Load: 46 Kva
Compressed Air: 87 Psi
General
Center Height Above Floor: 47.2"
Overall Height: 90.6"
Required Floor Space (W/O Chip Conveyor): 133.9” X 100.4”
Weight: 15,432 Lbs