I want to sell a machine like this
- CNC Machine
- Okuma
- Multas B-300W
- Lathe - CNC
- 2008
- B Axis:
- C Axis:
- Y Axis:
- Dual Spindles:
- Live Tooling:
Specifications
Distance between Spindle Noses: 50.8"Distance between Std. Chucks with Std. Jaws: 39.6"
Swing over Bed: 24.8"
Max Recommended Turning Diameter: 23.8"
Max Recommended Turning Length: 39.6"
X-Axis Travel: 22.83" (+22.04" to -0.79")
Y-Axis Travel: 6.30" (+3.15" to -3.15")
Z-Axis Travel: 36.81"
W-Axis Travel (sub-spindle): 39.37"
C-Axis Travel: Control angle 0.001 degrees, both spindles
B-Axis Travel: Control angle 0.001 degrees, 225 total, +30 to -195 degrees
Rapid Travel IPM: X (1,574); Y (1,024); Z (1,574); W (787); C (200 RPM); B (200 RPM)
Coolant Tank: 105 gallons
Floor Space (W x D x H): 171" x 89" x 102" (not including chip conveyor)
Weight:: 22,660 lbs. (w/ 40 ATC)
Notes
The machine has only cut plastic and has approximately 6,400 hours of cut time on it
Controller - OSP P200 THiNC ADMAC Parts software
Big Bore configuration with A2-8 nose (38-3800 RPM, 30/20HP) 8" Kitagawa
Chuck Package,Automatic Tool Changer
40 Station ATC - CAPTO C6
Parts Catcher
Parts Catcher for the subspindle
Absolent (or equal) Mist Collection System - fully integrated Chip Conveyor - Side Exit,
Filtering, with timer Chip Blaster JV10 1000 psi Pump System - multi-port version w/
programmable pressures Included Okuma Preparation for Mist Collector Thru H1
Spindle Coolant Preparation for 1,000 psi Miscellaneous Machine Options Multi-tap
transformer - 480 volt incoming line power
Much more call for Details