I want to sell a machine like this
- CNC Swiss
- Hanwha
- SL32HP
- Lathe - CNC
- 2005
- C Axis:
- Y Axis:
- Dual Spindles:
- Live Tooling:
Specifications
Machine Capacity:Max. Bar Capacity Round: 1.250
Max Bar Capacity Hex: 1.062
Max. Bar Capacity for the Sub-Spindle: 1.250
Tapping Capacity on the Main Spindle: 0.312
Front Ejection from the Sub-Spindle: 2.750
Rear Ejection from the Sub-Spindle: 11.000
Drilling Capacity on the Sub-Spindle: 0.393
Tapping Capacity on the Sub-Spindle: 0.312
Drilling Capacity on the Sub-Spindle: 0.393
Tapping Capacity on the Cross Tap: 0.250
Main Spindle:
Spindle Speed Range: 300-8,000 RPM
AC Spindle Drive: 7.5 HP
C-Axis Control Minimum Programmable Angle: 0.001 Deg.
C- Axis Locking Gear: Every 1.0 Deg.
Z-Axis Stroke: 8.260
Z-Axis Rapid Traverse: 1,200 IPM
Sub-Spindle:
Spindle Speed Range: 300-8,000 RPM
AC Spindle Drive: 5 HP
C-Axis Control Minimum Programmable Angle: 0.001 Deg.
C-Axis Locking Gear: Every 1.0 Deg.
Z-Axis Stroke: 8.260
Z-Axis Rapid Traverse: 1,200 IPM
Independent 4 Position Powered Drilling Station:
Drilling Speed Range: 200-4,000 RPM
AC Spindle Drive: 1.5HP
Z-Axis Stroke: 8.260
Z-Axis Rapid Traverse: 1,200 IPM
Tool Positions:
O.D. Tool Positions: 5
O.D. Tool Shank: 0.625 Sq
Cross = Mill / Drill Stations: 4
Main I.D. Tool Positions: 9
Sub-Spindle I.D. Tool Positions (2 Powered): 4
Coolant/Lubrication Systems:
Coolant Pump Motor (Main Spindle): .6 HP
Coolant Pump Motor (Sub Spindle): .6 HP
Coolant Tank Capacity: 55 Gallons
Way Lube Tank Capacity: 0.48 Gallons
Machine Dimensions:
Width x Length x Height (door Closed): 65 x 96 x 70
Weight: 8,5000 lbs.
General Specification:
Voltage: 3 Phase 200V 220V
Power Required: 30KVA
Compressed Air: 80PSI
Machine Hours:
Power On: 23,874
Operating: 4,283
Cutting: 925
Notes
32mm Hanwha . Great machine other than issue with live tools for sale use as is no live tool operation or Live tool needs repair suspect bearings in the gear train . Edge Patriot 38 mag feeder H. Pressure coolant . Chip conveyer
Fanuc 16iTB System MTA Eagle 545 12' Hydrodynamic
Bar Feeder; Including Telescopic Nose, Synchronization
Clutch System, and Remnant Retract Turbo Chip Conveyor
Royal Filter Mist Collector (4) Stationary Drill Holders
Offset Option of 0.00001" min Input JBS Compensating Guide
Bushing System Nine Cutting Axes (X1, Y, Z1, C1, X2, Z2, C2, X3, Z3)
1-Degree Indexing Main & Sub Spindle for Heavy Milling
Independent 2-Axis, 4 Station Front Drilling Positions 2 are Powered
Full Stroke Synchronous Rotary Guide Bushing Units (S&M TD32S)
Full C-Axis Control, Both Main & Sub Spindles Parts Conveyor with
Part Collection Tray Parts Separator Air Blow Unit Controlled
by M-Code Pneumatic Part Ejection & Detection for Front Ejection
Long Parts Ejection From Back Spindle (Shaft Work) Broken Cut Off
Tool Detection Centralized Automatic Lubrication System w/Level
Detector Coolant Flow Detector for Safe Unmanned Operation
Leveling Bolts and Pads One Complete Set of Manuals Tooling
Package (Included) 5 Turning Stations (5/8" Square Shank)
4 Cross Drilling/Slotting Stations (ER20) 9 Front ID Post
(2 Power Driven 2 Stationary) (ER-20) 4 Back ID Post
(2 Power Driven 2 Stationary) (ER-20) Safety Door Interlock