Ottomatics Inc. Machine List

Specifications

Capacity:
Swing over Z Cover 25.59”
Cutting Diameter with standard tools 11.02”
Cutting Length 15.75”
Distance between spindle faces 30.71”
Travels and Feeds:
X-axis 7.67”
Z-axis 15.94”
Y-axis 3.34” (+1.96”/-1.37”)
X-axis Rapid Traverse 945 IPM
Z-axis Rapid Traverse 1,181 IPM
Headstock: Left Spindle
Spindle Nose A2-6”
Spindle bore diameter 2.87”
Bar Capacity 2.52”
Spindle Speed 4,000 RPM
Spindle Torque (30 Minute Rating, not Maximum) 15HP - 70 lbf. or 103 lbf.
Spindle Torque (30 Minute Rating, not Maximum) 25HP - 101 lbf. or 151 lbf.
Spindle Drive (AC-30 Minute Rating) 15 or 25HP
Headstock: Right Spindle
Spindle Nose A2-5”
Spindle bore diameter 2.01”
Bar Capacity 1.65”
Spindle Speed 6,000 RPM
Tool Turret:
Number of Tools 12
Number of Driven Tools available 12
Number of Tools driven at one time 1
Type Electric Servo/Hydraulic clamp
Tool Selection Bi-Directional
Index Time Next Station Incl. Unclamp and Clamp “T” & “V” .3 second
Index Time Next Station Incl. Unclamp and Clamp “M” & “MY” .2 second
Speed range - Driven Tools 5 – 5,000 RPM
Tool Capacity:
Square 3/4“
Boring Bar 1 1/4”
Radial and axial driven tool holder ER-25
Tailstock:
Tailstock Programmable Body Travel 19.68”
Quill Taper 4 MT
Center Built-in or External
Auxiliary Units:
Coolant Pump Horsepower 2.0
Rated Flow, Standard Coolant 2.6 GPM @ 100 PSI
Automatic Lubrication System LUBE, 1/2 Gal. Reservoir
Machine Specifications:
Length 104.33”
Width 70.87”
Length with Longitudinal Chip Conveyor 153.54”
Width with Electrical Panel door fully open 108.27”
Approximate Weight 14,000 lbs.