Specifications
Maximum Machining Diameter: .63"Maximum Machining Length: 7.87" Per Chucking
Maximum Taking out Length of Product: 3.15"
Maximum Front Drilling Diameter: .39"
Maximum Front Tapping Diameter (Tap & Die): M8 (Tap) & M6 (Die)
Spindle Through Hole Diameter: .79"
Maximum Main Spindle Speed: 15,000 Rpm
Spindle Speed Change Steps: Stepless
Spindle Indexing: 15 Degree
Spindle C-Axis: 0.001 Degree
Maximum Chuck Diameter of the Back Spindle: .63"
Maximum External Work Piece Length of Back Spindle: 1.57"
Maximum Drilling Diameter in the Back Machining Process: .24"
Maximum Tapping Diameter in the Back Machining Process: M5
Maximum Back Spindle Speed: 10,000 Rpm
Back Spindle Speed Change Steps: Stepless
Back Spindle Indexing: 15 Degree
Back Spindle C-Axis: 0.001 Degree
Rotary Tool Spindle for Cross Machining
Maximum Drilling Diameter: .2"
Maximum Tapping Diameter: M5
Maximum Spindle Speed: 6,000 Rpm
Spindle Speed Change Steps: Stepless
Number of Tools to Be Mounted
Turning Tools on the Gang Tool Post: 6
Rotary Tools for Cross Machining: 4
Front Drilling Tool: 4
Back Drilling Tool: 4
Tooling Size
Tool (Gang Tool Post): 3/8" X 3/8" X 3.93"
Sleeve 3/4"
Maximum Diameter of Tool Mounted in the
Rotary Tool Holder: .28"
Rapid Feed Rates
X1 Axis: 34 M/Min
Y1 Axis: 34 M/Min
Z1 Axis: 32 M/Min
X2 Axis: 32 M/Min
Z2 Axis: 32 M/Min
Axis Strokes
X1 Axis: 4.8"
Y1 Axis: 4.8"
Z1 Axis: 7.87"
X2 Axis: 10.96"
Z2 Axis: 5.91"
General
Bar Length: 98.43"
Center Height: 41.34"
Motors for Main Spindle Drive (Cont/15 Min): 5 Hp / 5 Hp
Input Power Capacity: 8 Kva
Coolant Tank Capacity: 34.3 Gallons
Size: 42.2" (D) X 71.65" (W) X 63.39" (H)
Weight: 4,300 Lbs
Notes
Very clean 2005 K-16 VII 2001 LNS Express 326 Available
for additional $10K Fanuc Control Single shift, silicon
valley job shop ran oil Standard tooling 14507 power on
6460 cut LNS Express 326 Magazine Bar Loader (used)
New 2001 - used on Citizen L20 Swiss Type Sliding
Headstock CNC Lathe, 3mm to 26mm bar capacity x
12' bar lengths, very good condition, 8mm guide
channel and pusher set, manuals.