I want to sell a machine like this
- CNC Swiss
- Tsugami
- BU 38 SYE
- Lathe - CNC
- 32mm
- 2003
- C Axis:
- Y Axis:
- Live Tooling:
- Dual Turrets:
Specifications
2001 Tsugami MU38-SY-E barEquipped With:
Control: Fanuc 18iTA
Simul. Control Axis: 6 (2+4)
Least Input Increments: 0.0001in (diameter for X-axis)
Stock Diameter: 1.500"
Max. Machining Length: 9.8"
Max. Drilling Dia.: .63" in 1045 steel
Max Tapping Diameter: 1/2" in 1045 steel
Height of Sp. Center: 1,000 mm (39.37")
Spindle Speed: 60 to 5,000 rpm
Motor Output: 11 kw (14.7 hp)
Cutting Torque: 35 nm
Spindle Indexing: C-axis (.01 degrees)
Number of Turrets: 2
Number of Mountable Plane: 8 surfaces per turret,
3 tool locations per surface
Indexing Time: T1: 0.2 sec/pos.
T2: 0.3 sec/pos.
Idle Time (chip to chip): T1:0 to 1.5 sec
T2: 0 to 1.7 sec
Indexing Method: Servomotor
Max. Speed of Drive Axis: T2 Turret 5,400 rpm
Back Spindle:
Spindle Speed: 60 to 5,000 rpm
Motor Output: 5.5 kw (7.5 hp)
Cutting Torque: 14 n-m
Spindle Indexing: 5 deg. (72 div.)
Feed:
Stroke: X1,X2: 3.15"
Z1: 9.8"
Z2: 5.51"
Y(T2 Turret): 3.15" (Y & SY)
Z3: 11.22"
Rapid Traverse: X1, Z1, Z2, Z3: 787 ipm
X2: 472 ipm
Y: 394 ipm (Y & SY models)
Dimensions, Approx (w x d x h): 139 x 81 x 70"
Weight (Approx): 11,500 lb
Notes
Equipped with (to be verified by buyer):
Parts Conveyor
REM Cool High Pressure Coolant System
LNS HYS 6.38 Gatling-type Super hydrobar Hydraulic Barfeed
(2) Cross Drills
(1) Face Drill
(6) ID Tools
(6) OD Tools
Hours approx:
Power on 31884 / Cutting 11405
Mist Collector (available at extra cost)
All Specs must be verified by the Buyer
TSUGAMI MU38-SY-E Swiss Type CNC Lathe (used) New 2001 w/LNS
Super Hydrobar Model HYS-6.38 HS-4.8 single bar feed system (12'),
38mm bar capacity, twin turrets with Y axis turret, 8 station turrets
with all stations on ine turret live, Full C axis, sub spindle, part conveyor,
ran oil, manuals, excellent cond. Tooling: (2) cross drills, (1) face drill,
(6) ID, (6) OD holders.