I want to sell a machine like this
- Automatic
- Mitsubishi
- T35
- Multi Spindle Bar
- 2002
- C Axis:
- Y Axis:
- Live Tooling:
Specifications
MACHINE SPECIFICATIONS SPINDLE CARRIER- 6 spindles
- spindle diameter 75mm (3")
- Collet size 5mm (1.4")
- Bar length 3,658mm
- Spindle speed 2,800 rpm
- Output of main motor VAC 15 kW (20 hp) continuous)
18.5 kW(24.7) rated @ 30 min.
(2) INDEXING
- Output of motor AC servo motor, 4.5kw (6hp)
- Idle time 1.1 seconds
(3) END TOOLING SLIDE
- Output of motor AC servo motor, 4.5kw (6hp)
- Stroke 150mm (5.9")
- Rapid traverse 24 m/min., (944.8 ipm)
(4) CROSS SLIDE
- X-Axis positions (1- 6)
- Output of motor AC Servo motor, 75 kW (1hp)
- Stroke 65mm (2.6")
- Rapid traverse 18 m/min (708 ipm)
- Z-Axis positions (3-6) (optional at 1 & 2)
- Output of motor AC Servo motor, .75kW (1hp)
- Stroke 150mm (5.9")
- Rapid traverse 18m/min. (708 ipm)
(5) INDEPENDENT SLIDE, Z-Axis (Optional for up to 3 positions of positions
3,4,5 and 6)
Accel reaming, threading sub-spindle pick-up and boring or milling
- Output of motor AC Servo motor, 75 kW (1hp)
- Stroke 150mm (5.9")
- Rapid traverse 18m/min. (708 ipm)
Sub-spindle, Y-axis, optional for position 6
(6) CHUCKING AND STOCK FEEDING
- Stock feed 120mm (4.7")
WEIGHT (base machine only) 10,000kg (22,025lbs)
Notes
Two 35mm and one 42mm
Fanuc-15TTF/dual operator stations
MACHINE OPTIONS - (As Originally Quoted)
1. High pressure coolant equipment $9,360.00
2. Spindle angular bearings for 3,500rpm$3,750.00
3. Universal chip conveyor $12,150.00
4. X, Z combination cross slide, position 1,2 $26,630.00
5. Rigid tapping attachment, position 3,4 or 5 $32,500.00
6. Polygon milling attachment, position 4 or 5 $24,150.00
7. Pick-up attachment (sub-spindle) with air blow $29,930.00
8. Parts chute with air cylinder $3,380.00
F. CONTROL OPTIONS
1. Manual data input and display unit 9” monochrome $5,550.00
CRT, rear side
2. Manual pulse generator, rear side $1,790.00
3. Automatic corner override $650.00
4. Multiple canned cycle for turning $1,100.00
5. Axis number display $800.00
6. Program number quick search $450.00
7. Multiple counter (tool life management [by count]) $2,150.00