Send Me A Quote

I want to sell a machine like this

  • CNC Machine
  • Mazak
  • INTEGREX 200-IV ST
  • Lathe - CNC
  • 2006
  • Spindle Size: 2.55"
  • Y Axis:
  • Dual Turrets:
 Mazak INTEGREX 200-IV ST Lathe - CNC  2006

Specifications

Max Turning Diameter Lower Turret : 10.24″
Max Swing Upper Turret : 26.0″
Max Swing with Y Axis : 19.70″
Max Swing over Cross Slide : 26.0″
Max Turning Length: 40.00″
Max Bar Capacity Main Spindle : 2.55″
Max Bar Capacity Sub Spindle : 2.55″
Max Weight on Main & Sub Spindle : 660 lbs
Travels:
X1 Axis Travel Upper : 22.83″
X2 Axis Travel Lower : 5.91″
Z1 Axis Travel Upper : 41.14″
Z2 Axis Travel Lower : 38.98″
Y Axis Travel: 6.30″
W Axis Travel: 41.34″ ( Sub Spindle )
C Axis: 360° (0.001°) Both Spindle
Feedrate:
Rapid Traverse X Axis: 1496 IPM
Rapid Traverse Z Axis: 1496 IPM
Rapid Traverse Y Axis: 1023 IPM
Rapid Traverse B Axis: 1181 IPM
Spindle:
Main Spindle Bore: 2.99″
Sub Spindle Bore: 2.99″
Main Spindle Nose: A2-6
Sub Spindle Nose: A2-6
Main Spindle Speed: 35-5000 RPM
Sub Spindle Speed: 35-5000 RPM
Main Spindle Power: 22 kw
Sub Spindle Power: 18.5 kw
Milling Head:
Single Station Pendulum Head with 40 ATC
Tool Type: KM-63, 40 Taper
Spindle Speed: 15-12000 RPM
Spindle Motor: 18.5 kw
Spindle 90° Index Time: 0.5 Sec
Lower Turret:
Capacity: 9 Stations
Turret Index Time: 0.14 Second
OD Tool Size: 1.00″
ID Tool Size : 1.26″
General:
Power: 67 kva, 220v / 3-Phase
Air Required: 71 PSI
Overall Dimensions: 160″ x 93″ x 102″ High
Overall Dimensions: 200″ x 93″ x 102″ High with Chip Conveyor
Weight: 25,500 lbs

Notes

Fully powered / tested & in Good working condition. Only 14,373 Cutting Hours. Equipped with 2 Chucks, Full C Axis, Milling, Sub Spindle, Second Turret and Y Axis. Comes with Parts & chip conveyor, Manuals.”
Mazatrol Matrix CNC Control
12000 RPM Pendulum Milling Head
40 Tools Automatic Tool Changer
Servo Controlled Full C-Axis on Both Spindles
9 Station Lower Turret
Y Axis Capability
PCMCIA Card Slot
USB LAN Options
EIA/ISO Programming
3D Coordinate Conversion
8″ Big Bore Chuck on Main Spindle
8″ Chuck on Sub Spindle
Rigid Tapping on Both Spindles
Foot Operated Control for Chuck
High Pressure Coolant System
Chip Conveyor
Inbuilt Transformer
Chiller Unit
Comes with Tools, Chip Conveyor, Books & Manuals.